High Performance and Flexible Chemical And Bio Sensors Using Metal Oxide Semiconductors

Tech ID: 27228 / UC Case 2016-090-0

Summary

UCLA researchers in the Department of Materials Science and Engineering have developed a simple method producing thin, sensitive In2O3-based conformal biosensors based on field-effect transistors using facile solution-based processing for future wearable human technologies as well as non-invasive glucose testing.

Background

The development of wearable sensors for in situ, rapid, and low-cost detection of various targets (e.g., heart rate and glucose levels) that are lightweight, comfortable, and small scale would be useful for many applications. Nanomaterials-based field-effect transistors (FETs) have been investigated for this sensor application due to its high sensitivity and response. However, the major challenge is obtaining both the required conformality and reproducibility with simple and large-scale processing.

Innovation

UCLA researchers proposed and demonstrated a new simple method of one-step spin coating of aqueous In2O3 solution for fabricating ultrathin, sensitive In2O3 semiconductor-based FETs for use as chemical biosensors. The In2O3-based FETs had mobility and on/off ratios of ~20 cm2·V-1·s-1 and over 107, respectively. Specific chemical treatment and enzyme immobilization of the FETs facilitated pH and glucose detection, respectively, in real-time with linear and fast responses. The devices had excellent contact on highly rough artificial skin surfaces and an artificial eye surface.

Applications

  • Non-invasive glucose level test using saliva or tear
  • Wearable biosensors for various targets such as heart rate and pH
    • Electronic skin
    • Disease diagnosis
    • Thermal regulation
    • Communication

Advantages

  • High sensitivity for non-invasive glucose level testing and other chemical and bio signals
  • Good FET device performance with mobility and on/off ratios of ~20 cm2·V-1·s-1 and over 107
  • Real-time pH and glucose detection with linear and fast responses
  • Compatible with flexible and wearable bio medical application on rough surface and skin
  • Low processing temperature (250oC)  
  • Compatible with large area processing that be integrated to roll-to-roll mass production for low cost process

State Of Development

Researchers have manufactured ultrathin, sensitive In2O3 semiconductor-based FETs for use as chemical biosensors. Glucose and pH detection has been demonstrated. Also the device shows excellent contact on artificial rough skin surfaces and eye surfaces.

Related Materials

Patent Status

Country Type Number Dated Case
United States Of America Issued Patent 10,436,746 10/08/2019 2016-090
 

Contact

Learn About UC TechAlerts - Save Searches and receive new technology matches

Inventors

  • Yang, Yang

Other Information

Keywords

Biosensor; aqueous process; In2O3; metal oxide semiconductor; conformal; flexible; field-effect transistor; wearable electronics; glucose; non-invasive; large area; roll-to-roll

Categorized As